滚轮导靴安装注意事项解说词

悦音为您推荐一篇解说词，这篇文案是由悦音老师倾心演绎。 
For re-installation Preparations before lifting Erection of scaffolding platform At the appropriate height, relative to the weight of two rail bracket hoisting rope tied in a rope hanging down the center of the chain hoist Heavy lifting before, you need to remove the side of the shoe If the shoe for roller, to four guide shoes are removed Hoisting heavy framework Hand pull hoist will hang heavy frame to the appropriate height Make the shoe fit the side rails and maintain contact In heavy bumper mounting positions on both sides of each branch of a × mm wooden Square wooden seat height = height + buffer buffer overrun distance height + Gently pour relax chain, so that heavy aircraft smoothly securely mounted on wooden poles Both sides were not loaded when the shoe's on the heavy wooden frame fixed on, both sides should make the frame and guide rail end and an equal distance Counterweight guide shoe installation, adjustment Installation guide shoe When the sliding guide shoe lining and installation to ensure the rail end clearance, under identical Roller guide shoe installation to be smooth, the two sides of the wheel after wheel rail should equal the amount of compression of spring, compression size should be specified by the manufacturer. If no provision is based on the use of moderate pressure adjustment, front wheel should face pressed rail, wheel centering rail center. Installation and fixed weights of Installation on weight Installed according to the manufacturer to design requirements for weight clamping device. Clamping device to prevent the weight of the weight issue in the elevator when the collision sound In addition to the top wire type, as well as baffle, top tube type two clamping device Compensation pier installation Under heavy collision at the plate should be installed to compensate pier